Filter By:
- BMX (1)
- Bottom Brackets (2)
- Brakes/Levers/Pads (10)
- Cables (3)
- Chainrings (6)
- Chains (4)
- Cranksets (4)
- Derailleurs (3)
- Show More Categories
- Forks (1)
- Handlebar Grips/Tape (9)
- Handlebars (1)
- Headsets (2)
- Pedals (7)
- Saddles (4)
- Seatposts (2)
- Shifters (2)
- Stems (1)
- Other (5)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts

$55.00 - $60.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!

$9.00
SRAM's PC 830 Chain offers accurate shifting, excellent durability, and superior power transfer for 8-speed drivetrains.

$119.95
Designed for enduro and trail riding, the AMg V2 Alloy chain guide features an upper guide for chain security and an integrated skid to protect the chainring and frame.
- Compatible with 1x9, 1x10, and 1x11 drivetrains
- Integrated nylon skid glides over rocks
- Softer co-molded upper for quiet operation
- Installs and adjusts with a single 4mm hex
- Compatible with chainlines 49mm and wider
- Tracked and grooved upper guide and backplate increases stiffness

Cane Creek's engineers were tasked with developing a no-compromise, best-in-class premium headset. With the introduction of their 110-Series, they did just that—choosing optimal materials, engineering the most effective internals and designing the best aesthetics available in a headset.
- Technical Description: 110-Series IS41/28.6/H9 | IS52/40
- Top Type: IS - Integrated
- Top Head Tube Inside Dia.: 41.1mm
- Stem Clamp Dia.: 28.6mm
- Top Stack Height: 9mm
- Top Bearing Type: Top-quality, sealed stainless steel bearings
- Bottom Type: IS - Integrated
- Bottom Head Tube Inside Dia.: 52.1mm
- Crown Race Seat Dia.: 39.79mm
- Crown Race Type: Aluminum, Dual-Seal
- Bottom Stack Height: 1mm
- Bottom Bearing Type: Top-quality, sealed stainless steel bearings
- Material: N/A
- Weight: 79.48 grams

- Aluminum clamps secure the grip on both ends using a hex wrench
- Loosen pinch bolts and grips slide on or off with ease
- 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)

$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated.
- High-strength plastic composite

$5.49 - $11.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

$21.00
Giant's Alloy Seatpost is dependable and respectably light at a great price. It boasts a single bolt micro-adjust clamp so you can dial in a great saddle position.

$22.99 - $46.99
FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain.
- Precision CNC machined AL7075/T6 alloy

$72.99
This aluminum link housing is the ultimate combination of durability and attention grabbing looks. It's designed to enhance your performance and appearance. So, why is it better than traditional housing? It's compressionless, which means better braking performance with enhanced modulation. But its flexibility allows for tight bends without kinking. It's also much lighter than traditional coiled steel housing while being more durable. Combine these benefits with Jagwire's Elite, ultra-slick polished cables and Slick-Lube liners that dramatically reduce friction and you've got the best of performance and style.
- Compressionless link housing gives crisp brake lever feel with extreme flexibility
- Each kit comes with links pre-installed on housing segments making setup quick and simple
- 50% lighter than traditional coiled steel brake housings; 30% lighter than Kevlar brake housings
- Durable, ultra-slick polished inner cables minimize system friction
- Aluminum housing won't kink or rust.
- 20th Anniversary Limited Edition Black kit (RCK705) has black link segments; the kit includes 6 additional accent links of each color including gold, silver, red, and blue

$93.99
FSA Pro Track Chainrings are CNC Machined AL7075/T6 with laser-etched logos.
- Requires 1/2" x 1/8" chain

$46.99
Our thickest bar tape is ideal for your next double century, gravel grinder or cyclocross race. Discover why our Pro Tour teams spec this tape for the Spring Classics.

$4.49 - $5.99
Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.

$18.00 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$13.00 - $47.99
FSA ATB chainrings deliver flawless shifting for any mountain drivetrain. Available in alloy and steel options.

$21.00
The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service.
- X-Sync (wide-narrow) tooth profiles for great chain management
- Compatible with Bosch mid-drive E-bike systems
- Material: Steel
- Size/BCD: Direct mount
- Recommended Group: EX1

$499.00
Yari shares the stiff, hard-hitting chassis as the Lyrik and combines it with the updated DebonAir air spring and proven Motion Control damper. The Yari fork is designed to inspire confidence for those hard-hitting enduro and E-MTB riders alike.
- Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- New graphics package for a fresh, premium look
- Motion Control damping featuring low-speed compression adjustment

$53.99
Imagination is the only limitation to how much the microSHIFT bar-end shifters can do. Their small, minimalistic designs are packed with precision machined mechanism that allows you to shift accurately with either index or friction mode. Go on any adventure without worries for mechanical issues.
- Includes shift cables

$105.00
External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

$19.95
- Classic BMX-style platform pedal for all-around use across varied disciplines
- Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives
- 22.5mm height/105mm width
- CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance
- Design compatible with most foot-retention strap systems including Gates Straps (available separately)
- Weight: 405g

$13.00
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain.
- High pin power with reinforced durability
- Offers a quieter riding experience
- Anti-drop design
- Inner plate chamfering helps to provide fast and smooth shifting
- Internal gear hub system compatible
- Links (links): 112
- Color: Silver
- Width: 9.3mm
- Drivetrain Speeds: Single Speed 1/2 x 1/8-inch
- Half Link Chain: No

$10.95
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange!
- Classic mushroom style collapsible rib pattern
- Constructed of our proprietary Soft Grip compound for added comfort
- Increasingly popular with top athletes around the world
- Open ends with black and white Two Color Push In Plugs end plugs included

$14.99
Easton's Pinline Bar Tape keeps your hands happy on long rides. Soft, supportive foam material delivers comfort while an adhesive backing makes sure the tape stays in place. Embossed Easton logos keep things looking classy.

$7.99
Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

$4.49 - $44.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

$29.99 - $52.99
FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability.
- Precision CNC machined AL7075/T6 alloy

$38.99
FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain.
- Precision CNC machined AL7075/T6 alloy

$86.00
True value and performance are found in the Tempo Adventure crankset. The cranks are built to serve the recreational rider well and enhance their riding enjoyment.
- Die-cast alloy crank arms
- Monocoque crank arm/spider
- AL7075-stamped and CNC-machined outer chainring
- Heat-treated chromoly inner chainring
- Chromoly chainring bolts
- Available for 9-11 speed system

$34.99
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance.
- Molded traction pins give you all the grip you need without risk of damaging your shoes or shins
- Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts
- 9/16"
Page 1 of 3
Next page